SINTA

0.0

Impact

Google Scholar

14

H-Index

Journal of Engineering and Vocational Education

an Open Access Journal

Exploring Wind Energy Utilization in Sustainable Rental Office Building Design in Makassar

Firdaus Yusuf
Sekolah Menengah Kejuruan Negeri 1 Muhammadiyah 2 Bontoala Makassar
Indonesia
Wahid Abdul
Universitas Islam Makassar ROR
Indonesia
wahidabdul@gmail.com
Share

  • Purpose of the study: This study aims to explore the integration of wind energy through wind turbine technology in the design of sustainable rental office buildings in Makassar City.

    Methodology: A qualitative exploratory approach was employed, including literature review, precedent study, site analysis, and wind potential assessment. Data were analyzed descriptively to formulate design strategies integrating wind turbines into building architecture.

    Main Findings: Makassar has average wind speeds of 2.5–3 m/s, suitable for small-scale wind turbines. Optimal building orientation, massing, and turbine placement on rooftops or facades enhance wind capture. Wind energy contributes to reduced conventional electricity consumption and supports sustainable building design.

    Novelty/Originality of this study: This research advances knowledge by harmoniously integrating wind turbine technology into architectural design, not merely as a technical add-on. It addresses the gap in wind energy exploration within building design, specifically for Makassar’s coastal context, promoting renewable energy adoption in sustainable architecture.

  • How to cite

    Yusuf, F., & Abdul, W. (2026). Exploring Wind Energy Utilization in Sustainable Rental Office Building Design in Makassar. Journal of Engineering and Vocational Education, 1(1), 1-7. https://doi.org/10.37251/joeave.v1i1.2921

    More Citation Formats

  • 114
    Abstract views
    89
    Downloads

    Metrics — Badges

    1. [1] W. Pan and J. Du, “Effects of neighbourhood morphological characteristics on outdoor daylight and insights for sustainable urban design,” J. Asian Archit. Build. Eng., vol. 21, no. 2, pp. 342–367, 2022, doi: 10.1080/13467581.2020.1870472.
    2. [2] M. Muqoffa et al., “Exploring natural ventilation strategies in Javanese vernacular houses for sustainable design,” J. Asian Archit. Build. Eng., vol. 24, no. 6, pp. 4985–5004, 2025, doi: 10.1080/13467581.2024.2439348.
    3. [3] A. E. Afful et al., “Towards the delivery of environmentally sustainable buildings in Ghana: Drivers of capacity building,” Int. J. Constr. Educ. Res., vol. 22, no. 1, pp. 27–52, 2025, doi: 10.1080/15578771.2025.2457322.
    4. [4] S. Mutale, Y. Wang, J. Yasir, A. Banda, and T. Aboubacar, “Exploring the economic prospects of wind energy in Zambia,” Int. J. Sustain. Eng., vol. 17, no. 1, pp. 30–45, 2024, doi: 10.1080/19397038.2024.2371404.
    5. [5] M. H. Raouadi and S. Thamri, “First study on harvesting wind energy using hybrid piezo-pyroelectric nanogenerator,” Int. J. Sustain. Eng., vol. 17, no. 1, pp. 43–49, 2024, doi: 10.1080/19397038.2024.2396754.
    6. [6] A. N. Lucas and S. K. Löschke, “Towards circular renovation: A comparative review of circular economy integration in sustainable building rating systems,” Build. Res. Inf., vol. 53, no. 3, pp. 375–396, 2025, doi: 10.1080/09613218.2024.2394470.
    7. [7] S. Yoo and S. Oh, “Flow analysis and optimization of a vertical axis wind turbine blade with a dimple,” Eng. Appl. Comput. Fluid Mech., vol. 15, no. 1, pp. 1666–1681, 2021, doi: 10.1080/19942060.2021.1989041.
    8. [8] Z. Rahemtulla, R. Wickenden, and T. Hughes-Riley, “Using a human centred design approach to develop a fall detection sock for older women,” Des. Heal., vol. 8, no. 3, pp. 318–335, 2024, doi: 10.1080/24735132.2025.2454718.
    9. [9] A. N. Novak, “Global discourses of protest and support of offshore wind energy,” Qual. Res. Reports Commun., vol. 26, no. 1, pp. 71–83, 2025, doi: 10.1080/17459435.2024.2342941.
    10. [10] S. Han and J. Baek, “The emergence of architects as key players in Korea’s rental housing landscape,” J. Asian Archit. Build. Eng., vol. 00, no. 00, pp. 1–21, 2025, doi: 10.1080/13467581.2025.2606476.
    11. [11] H. Pineo, G. Moore, and I. Braithwaite, “Incorporating practitioner knowledge to test and improve a new conceptual framework for healthy urban design and planning,” Cities Heal., vol. 6, no. 5, pp. 906–921, 2022, doi: 10.1080/23748834.2020.1773035.
    12. [12] G. A. Putero, R. Affandy, M. Fauzi, F. I. Zain, M. N. I. Prabawanto, and A. K. Faizin, “Numerical and Analytical Analysis of the Shaft Design for a Rotating Drum Bioreactor Using Stainless Steel 304 Material,” Media Mesin Maj. Tek. Mesin, vol. 26, no. 2, pp. 46–58, 2025, doi: 10.23917/mesin.v26i2.8738.
    13. [13] S. K. Jwasshaka, N. F. Mohd Amin, and G. Dogara, “Self-reliance through innovation and entrepreneurship competency of technical/engineering polytechnic students in Nigeria,” J. Pendidik. Teknol. dan Kejuru., vol. 24, no. 2, pp. 185–191, 2018, doi: 10.21831/jptk.v24i2.20396.
    14. [14] G. Gonzalez-A, N. Barrera-G, G. Ayala, J. Aaron Padilla, and D. Alvarado-Z, “Dynamic performance of a skystream wind turbine: A bond graph approach,” Cogent Eng., vol. 6, no. 1, pp. 1–35, 2019, doi: 10.1080/23311916.2019.1709361.
    15. [15] Rahma, K. Alsarhi, M. J. L. Prevoo, L. R. A. Alink, and J. Mesman, “Sensitive parenting in urban slums in Makassar, Indonesia: the roles of experienced child maltreatment and sociodemographic risk,” Attach. Hum. Dev., vol. 23, no. 2, pp. 199–211, 2021, doi: 10.1080/14616734.2020.1828546.
    16. [16] M. Jowkar, A. Temeljotov-Salaj, C. M. Lindkvist, and M. Støre-Valen, “Sustainable building renovation in residential buildings: barriers and potential motivations in Norwegian culture,” Constr. Manag. Econ., vol. 40, no. 3, pp. 161–172, 2022, doi: 10.1080/01446193.2022.2027485.
    17. [17] Y. I. Salihu and N. S. Mohd, “Socio economic determinants of students’ academic achievement in building technology in north-central Nigeria,” J. Pendidik. Teknol. dan Kejuru., vol. 25, no. 1, pp. 10–20, 2019, doi: 10.21831/jptk.v25i1.20630.
    18. [18] R. S. Ghoneim, M. Arabasy, and A. N. Abdulhadi, “Ai driven optimization of indoor environmental quality and energy consumption in smart buildings: A bio-inspired algorithmic approach,” J. Asian Archit. Build. Eng., vol. 25, no. 2, pp. 1089–1113, 2025, doi: 10.1080/13467581.2025.2472742.
    19. [19] A. E. Carst, “Complementors’ interactions in the wind energy ecosystem: Coopetitive dynamics,” Ind. Innov., vol. 31, no. 8, pp. 1019–1057, 2024, doi: 10.1080/13662716.2024.2359375.
    20. [20] Q. Ke and M. White, “Does energy performance rating affect office rents? A study of the uk office market,” J. Sustain. Real Estate, vol. 16, no. 1, pp. 1–12, 2024, doi: 10.1080/19498276.2024.2356715.
    21. [21] H. Zhang, Y. Hu, and W. Wang, “Wind tunnel experimental study on the aerodynamic characteristics of straight-bladed vertical axis wind turbine,” Int. J. Sustain. Energy, vol. 43, no. 1, pp. 1–25, 2024, doi: 10.1080/14786451.2024.2305035.
    22. [22] L. K. A. Safo, D. Y. A. Duah, and S. B. Liwur, “Sustainable architectural design and land-use application to civic centres in ghana: The case of Damongo,” Urban, Plan. Transp. Res., vol. 12, no. 1, pp. 1–29, 2023, doi: 10.1080/21650020.2023.2290055.
    23. [23] B. Izmi and Maida Nur A, “Social media impact on cosmetology students in enhancing makeup techniques ability and their character building,” Pendidik. Teknol. dan Kejuru., vol. 30, no. 2, pp. 287–296, 2024, doi: 10.21831/jptk.v30i2.78888.
    24. [24] L. N. Andagani, A. Musa Hassan, C. C. Onn, S. S. Sinoh, and T. T. Khaled, “Towards a sustainable built environment: Reducing carbon emissions in school buildings through bim-lca in Madinah,” J. Asian Archit. Build. Eng., vol. 00, no. 00, pp. 1–14, 2025, doi: 10.1080/13467581.2025.2606456.
    25. [25] F. Mattioli and V. Tessier, “Disentangling collaborative design for sustainability,” CoDesign, vol. 00, no. 00, pp. 1–21, 2025, doi: 10.1080/15710882.2025.2524413.
    26. [26] R. Hershey, M. Kalina, I. Kafodya, and E. Tilley, “A sustainable alternative to traditional building materials: Assessing stabilised soil blocks for performance and cost in Malawi,” Int. J. Sustain. Eng., vol. 16, no. 1, pp. 155–165, 2023, doi: 10.1080/19397038.2023.2237062.
    27. [27] X. Zhang and X. Zhang, “Design of low carbon and cost efficient concrete frame buildings: A hybrid optimization approach based on harmony search,” J. Asian Archit. Build. Eng., vol. 22, no. 4, pp. 2161–2174, 2023, doi: 10.1080/13467581.2022.2145202.
    28. [28] M. I. R. Winandari et al., “Placemaking in Yogyakarta’s public housing: The role of square layouts and community initiatives in sustainable design,” J. Asian Archit. Build. Eng., vol. 00, no. 00, pp. 1–12, 2025, doi: 10.1080/13467581.2025.2570036.
    29. [29] M. Karamoozian and H. Zhang, “Obstacles to green building accreditation during operating phases: Identifying challenges and solutions for sustainable development,” J. Asian Archit. Build. Eng., vol. 24, no. 1, pp. 350–366, 2025, doi: 10.1080/13467581.2023.2280697.
    30. [30] Z. Gu et al., “Predicting embodied carbon reduction by evaluating building shape parameters in preliminary design through the dom-ino system,” J. Asian Archit. Build. Eng., vol. 24, no. 5, pp. 3692–3711, 2025, doi: 10.1080/13467581.2024.2396610.